Sequence type encountered with 5 steps.

Skipping communication connect!

--Copying and transferring structure set...
--Post function loop...

[INFO  | 07/28/14 15:26:58]:
 == RESET INSTRUMENT Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf100      40E          *     (0) SUCCESS                |
Waiting 1s for instruments to boot...
Pushing gain configuration values...
cbi_net_fdopen:connect: : Connection refused
[ERROR | 07/28/14 15:27:14]cbi_open_sockets_active:  Bad socket fd. Unable to connect to remote host - ctacf100
   cbi_net_error_buf:  cbi_net_fdopen: connect error
 cbi_net_net_close: socket close successful.

--Copying and transferring structure set...
--Post function loop...
OP TIMING.active_timing_setup = 5 [14ns_FIX_G]
[ERROR | 07/28/14 15:27:14]cbi_inst_loop:  Post function failed for instrument ctacf100.

[INFO  | 07/28/14 15:27:14]:
 == PUSH FULL CONFIG Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf100      40E          *     (7) CHANGED GAIN           |
Setting gains
cbi_net_fdopen:connect: : Connection refused
[ERROR | 07/28/14 15:27:14]cbi_open_sockets_active:  Bad socket fd. Unable to connect to remote host - ctacf100
   cbi_net_error_buf:  cbi_net_fdopen: connect error
 cbi_net_net_close: socket close successful.

--Copying and transferring structure set...
[ERROR | 07/28/14 15:27:14]cbi_copy_touched_structs:  Failed to send structure to instrument ctacf100 @ 40E
[ERROR | 07/28/14 15:27:14]cbi_inst_loop:  Structure set transfer failure temp-->instrument ctacf100 @ 40E
--Initializing command...
--Executing command...
--Waiting for handshake completion...
--Post function loop...

[INFO  | 07/28/14 15:27:14]:
 == SET GAINS Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf100      40E                (1) SUCCESS w/ GATE ENABLE  |
Setting timing setup
--Copying and transferring structure set...
--Initializing command...
--Executing command...
--Waiting for handshake completion...
--Post function loop...

[INFO  | 07/28/14 15:27:14]:
 == SET TIMING SETUP Command Status Summary ==

 Instrument    Location    Active            Status           | Instrument    Location    Active            Status           |
--------------------------------------------------------------|--------------------------------------------------------------|
  ctacf100      40E                (0) SUCCESS                |
[INFO  | 07/28/14 15:27:14]  Begin post-command status check/recovery:   ...