CBETA Vacuum System
SX 4-pass vacuum drawing
- 7206-225_SX_4-Pass_08022019.pdf (Yulin Li, 08/07/2019)
Pre-production Girder
Beam Position Monitor
Test BPM in diagnostic line
A test BPM is planned to be installed in the diagnostic line to test buttons that will be installed in the FFAG section. The chamber for this test BPM includes a taper from the smaller diagnostic beam pipe diameter to the FFAG beam pipe diameter.Overall Vacuum Layout
-- RobMichnoff - 01 Mar 2017
| I | Attachment | Action | Size | Date | Who | Comment |
|---|---|---|---|---|---|---|
 pdf |
7206-225_SX_4-Pass_08022019.pdf | manage | 923 K | 07 Aug 2019 - 15:39 | UnknownUser | |
| pdf |
7206-301_Dummy-1.pdf | manage | 711 K | 01 Mar 2017 - 14:37 | UnknownUser | CBETA Pre-production girder vacuum drawing |
| pdf |
7206-611_Test_in_DI-1.pdf | manage | 253 K | 01 Mar 2017 - 20:37 | UnknownUser | CBETA test BPM drawing to be installed in diagnostic line |
 pptx |
cbeta_full_0306_2017_Vac_Instr.pptx | manage | 345 K | 28 Mar 2017 - 14:43 | UnknownUser |
This topic: CBETA > WebHome > CBETA-Vacuum-Systems-and-Beam-Stop
Topic revision: 07 Aug 2019, michnoff
Topic revision: 07 Aug 2019, michnoff
Copyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors. Ideas, requests, problems regarding CLASSE Wiki? Send feedback