BNL Project Manager (B PM) Is responsible for coordinating TSEs for the technical components provided by BNL. For periods of time where a TSE from BNL is require ...
BNL Collaborators (BC) As part of the Cornell Brookhaven collaboration, CBETA team members from BNL can fill any role, provided they receied the associated traini...
CBETA Beam Commissioning Plan Overview * CBETA Commissioning Planning * Shift schedule (short term and big picture goals) Link to GoogleDoc * COMMISSI...
External Collaborator (EC) An EC is from an institution that is not part of CBETA. They are at CBETA to perform CBETA driven research. Participation of ECs is coo...
Commissioning L2 Adam Barnik is the L2 for commissioning. While he is also one of the lead operators, as L2 he has the additional responsibility (a) of training o...
Lead Operator (LO) A lead operator is highly experienced at operating CBETA and is fully qualified for any CBETA operation. The lead operator has primary control ...
Observer – An observer does not participant in research or commissioning. They are welcome for networking reasons or to encourage them to become ECs in the future...
* Works with the Project Manager and Deputy Project Manager to provide overall direction for the project. * Is the primary project official and contact with NY...
Principle Investigators (PI) Provide high level scientific guidance and drive the physics program. PIs set the long term physics goals and approach at the project...
Run Coordinator (PM) Beyond the regular PM responsiobilities documented in CBETA's Project Management Plan, during commissioning the Cornell PM (just refered to a...
Scientific Coordinator (SC) Scientific Coordinators are assigned to each scientific problem under analysis. They lay out the scientific plan for the time allotted...
Support Operator (SO) The support operator is a partner and in safety terms the second person to the LO. Typically the SO will provide operational support to the ...
Technical Support Expert (TSE) Technical experts on CBETA subsystem that may be required in the control room, but who are not directly running the accelerator. Fo...
Visitor – Being a visitor is a status at CLASSE that one obtains by stisfying several saftey and training requirenments. Main.KarlSmolenski 29 Oct 2018