Find the buncher IOT screen

• From the main EDM window, choose "RF Operations" -> "Buncher"

Turning on the IOT

• Press all three of the following buttons, in any order
  • Start Mode
  • Beam Mode
  • RF Drive Mode
• A timer will start, which you can see from the "IOT Panel"
  • From the Buncher PLC Control Panel screen, click the "Buncher IOT" button in the upper right side, and choose "IOT Panel"
  • The timer should be counting down on the lower left side
  • When "IOT Mode" in the upper right corner says "RF Drive" it is ready to be used